Figure 8: Connecting the Radio in Blank Flash Mode (2 of 2)
No. Description
1 Personal Computer
2 Power Supply 3.8 V
3 Serial Data Cable
4 Programming Cable (USB Type-C)
4.2.2
Connecting the Radio in USB-C/Norm Mode
The function of this mode is for radio normal power-up and programming cable connection between the
radio and the PC.
Procedure:
1 Push the switch to the middle.
2 Connect the radio and the PC with the programming cable.
3 Power on the radio.
MN002952A01-AH
Chapter 4: Test Setup and Testing
40
To Next Page
Loading...
