5.7.2.6
Removing the Internal Antenna Module Assembly
Procedure:
Detach the internal antenna module assembly.
Figure 22: Detaching the Internal Antenna Module Assembly
5.7.2.7
Removing the USB-C/Audio Jack Flex Assembly
Once the USB-C/audio jack flex assembly is removed, a new USB-C O-ring must be replaced.
Procedure:
1 Use a torque screwdriver with 3 IP Torx Plus bit to unscrew the USB-C/audio jack metal retainer
screw in a counterclockwise direction.
Figure 23: Removing the USB-C/Audio Jack Retainer Screw
2 Lift the USB-C/audio jack metal retainer to remove it.
Figure 24: Removing the USB-C/Audio Jack Metal Retainer
3 Lift the USB-C/audio jack flex assembly to remove it.
MN002952A01-AH
Chapter 5: Maintenance
78
To Next Page
Loading...
