4 Lift the OLED display module assembly to remove it.
Figure 29: Removing the OLED Display Module Assembly
5 Remove the black tape as shown in Figure 30: Removing the Black Tape on page 80.
Figure 30: Removing the Black Tape
5.7.2.9
Removing the Main Seal
Once the main seal is removed, a new main seal must be replaced.
Procedure:
Lift the main seal to detach all retention features from the front housing. Remove the main seal.
Figure 31: Removing the Main Seal
5.7.3
Reassembling the Radio
Only Motorola Solutions Service Centers or Authorized Motorola Solutions Service Dealers can
disassemble the radio for repair or maintenance.
Prerequisites: Prepare a torque screwdriver with 3 IP and 6 IP TORX Plus
®
bits.
MN002952A01-AH
Chapter 5: Maintenance
80
To Next Page
Loading...
