Motorola ST7000 - Radio Disassembly and Reassembly; Torque Specification Chart; Disassembling the Radio; Table 25: Power Supply

Table 25: Power Supply
Part Number Description
PS000212A01 201 W Power Supply
Table 26: Programming Cable
Part Number Description
PMKN4122_ RS-232 Programming cable (set cable switch to FLASH)
PMKN4196_ USB-C to USB-A Radio Programming Cable
Table 27: Miscellaneous
Part Number Description
HW001104A01 Battery Cover Removal Tool
PMHN4359_ Battery Cover
5.7
Radio Disassembly and Reassembly
Mechanical checks and self-tests should be performed on the unit at the basic level of service. To
perform testing at the field level, it is sometimes necessary to remove the antenna and the housing
from the unit.
NOTICE: Read each procedure thoroughly before performing the actual task.
5.7.1
Torque Specification Chart
Use the recommended torque value in this chart when fastening different parts of the radio.
Table 28: Torque Specification Chart
Description Part/Kit Quantity Torque
USB-C/AJ Retainer Screw FN000128A01 1 0.7±0.1 lb-in
Main Screw 03012043002 6 2.2±0.1 lb-in
5.7.2
Disassembling the Radio
Only Motorola Solutions Service Centers or Authorized Motorola Solutions Service Dealers can
disassemble the radio for repair or maintenance.
Prerequisites: Prepare a torque screwdriver with 3 IP and 6 IP TORX Plus
®
bits.
MN002952A01-AH
Chapter 5: Maintenance
74