Motorola ST7000 - Pairing Bluetooth Devices with Your Radio

4.15
Service Flowchart
The service flowchart shows the expected results and their next required actions for the testing
procedure of the radio.
Figure 11: Service Flowchart
1
Connect the radio to
the IFR (1)
Perform all
tests: RF and audio
Replace
Main board
(*) and re-test
Pass
Fail
Maintenance
level?
Replace
other kits one-by-one
and re-test
(1) Refe
r to Replacement Parts
in M
aintenance section
.
Pass
- Replace the customer’s radio
- Send the radio to Level 3 maintenance
- Send the new TEI number to service provide
r
- Clone/reprogram customer details to new unit
1
Pass
Fail
Fail
- Replace battery
- Re
place antenna
- Send new TEI number to
the service provider
- Clone/reprogram,
customer det
ails to new
unit
MN002952A01-AH
Chapter 4: Test Setup and Testing
64