Moxa Technologies AirWorks AWK-1137C User Manual

AirWorks AWK-1137C Web Console Configuration
3-8
Device contact information
Setting Description Factory Default
Max. of 31 characters Provides
information about whom to contact in order to resolve
problems. Use this space to record contact information of the
person responsible for maintaining this AWK-1137C.
None
Login Message
Setting Description Factory Default
Max. of 31 characters Enter a message to display to all users when they log in Blank
Login authentication failure message
Setting Description Factory Default
Max. of 31 characters Enter the login authentication failure message to display
to the
user who logs in with an invalid username or password
None
Interface On/Off
Network Settings
The Network Settings configuration panel allows you to modify the usual TCP/IP network parameters.
However, due to the addition of the Client-Router operation mode, this panel provides two different sets of
network parameters. Explanations for both types of configuration are given below.
Network Settings for Client /Slave Operation Modes
IP address assignment
Setting
Description
Factory Default
DHCP The AWK-1137C’s IP address will be assigned
automatically by
the network’s DHCP server
Static
Static Set up the AWK-1137C’s IP address manually.

Moxa Technologies AirWorks AWK-1137C Specifications

General

Brand	Moxa Technologies
Model	AirWorks AWK-1137C
Category	Wireless Access Point
Language	English