Moxa Technologies AirWorks AWK-1137C User Manual

AirWorks AWK-1137C Web Console Configuration
3-55
NAT
Setting Description Factory Default
Enable/Disable Enables or disables the NAT translation Disable
Port Forwarding
Active: Click the checkbox to enable Port Forwarding rule(s).
Protocol: Specifies the communication protocol.
WAN Port: Specifies the external port to be forwarded to.
LAN IP: Specifies the “forward to” LAN IP.
LAN Port: Specifies the “forward to” LAN Port.
SNMP Agent
The AWK-1137C supports SNMP V1/V2c/V3. SNMP V1 and SNMP V2c use a community string match for
authentication, which means that SNMP servers access all objects with read-only or read/write permissions
using the community string public/private (default value). SNMP V3, which requires you to select an
authentication level of MD5 or SHA, is the most secure protocol. You can also enable data encryption to
enhance data security.
SNMP security modes and security levels supported by the AWK-1137C are shown in the following table. Select
the security mode and level that will be used to communicate between the SNMP agent and manager.
Protocol
Version
Setting on
UI web page
Authentication
Type
Data
Encryption
Method
SNMP
V1, V2c
V1, V2c
Read
Community
Community string No Use a community string match for authentication
V1, V2c
Write/Read
Community
Community string No Use a community string match for authentication

Moxa Technologies AirWorks AWK-1137C Specifications

General

Brand	Moxa Technologies
Model	AirWorks AWK-1137C
Category	Wireless Access Point
Language	English