Moxa Technologies AirWorks AWK-1137C User Manual

AirWorks AWK-1137C Web Console Configuration
3-56
Protocol
Version
Setting on
UI web page
Authentication
Type
Data
Encryption
Method
SNMP V3 No-Auth No No Use account with admin or user to access objects
MD5 or SHA Authentication
based on MD5 or
SHA
No Provides authentication based on HMAC-MD5, or
HMAC-SHA algorithms. 8-character passwords
are the minimum requirement for
authentication.
MD5 or SHA Authentication
based on MD5 or
SHA
Data
encryption
key
Provides authentication based on HMAC-MD5 or
HMAC-SHA algorithms, and data encryption key.
8-character passwords and a data encryption
key are the minimum requirements for
authentication and encryption.
The following parameters can be configured on the SNMP Agent page. A more detailed explanation of each
parameter is given below the following figure.
SNMP agent
Setting Description Factory Default
Enable Enables SNMP agent Disable
Disable Disables SNMP agent
Remote management
Setting Description Factory Default
Enable Allow remote management via SNMP agent Disable
Disable Disallow remote management via SNMP agent
Read community (for V1, V2c)
Setting Description Factory Default
V1, V2c Read
Community
Use a community string match with a maximum of 31
characters for authentication. This means that the SNMP
agent
can access all objects with read-only permissions using this
community string.
public
Write community (for V1, V2c)
Setting Description Factory Default
V1, V2c Read /Write
Community
Use a community string match with a maximum of 31
characters for authentication. This means that the SNMP ag
ent
can accesses all objects with read/write permissions using this
community string.
private

Moxa Technologies AirWorks AWK-1137C Specifications

General

Brand	Moxa Technologies
Model	AirWorks AWK-1137C
Category	Wireless Access Point
Language	English