Moxa Technologies AirWorks AWK-1137C User Manual

AirWorks AWK-1137C Web Console Configuration
3-60
NOTE
• The event type, RSSI report events is useful during the site survey stage and uses a special u
tility
to draw values from the device RSSI tables. However, this function increases the network traffic load
.
Hence, we recommend setting this function to disable during normal operations.
• You will have to sto
p the communication traffic in order to generate a report that is suitable for use
with the Turbo Roaming Analyzer if you have activated the RSSI report events event type.
E-mail Notifications
Notification Event Types
Check the box for Active to enable the event items. All default values are deactivated (unchecked). Details for
each event item can be found in the “System log Event Types” section.
E-mail Server Settings
You can set up to 4 e-mail addresses to receive alarm emails from the AWK-1137C. The following parameters
can be configured on the E-mail Server Settings page. In addition, a Send Test Mail button can be used to
test whether the Mail server and e-mail addresses work well. More detailed explanations about these
parameters are given after the following figure.
Mail server (SMTP)
Setting Description Factory Default
IP address The IP Address of your email server. None
User name & Password
Setting Description Factory Default
User name and password used in the SMTP server None
From e-mail address
Setting Description Factory Default
Max. 63 characters Enter the administrator’s e-
mail address which will be shown in
the “From” field of a warning e-mail.
None

Moxa Technologies AirWorks AWK-1137C Specifications

General

Brand	Moxa Technologies
Model	AirWorks AWK-1137C
Category	Wireless Access Point
Language	English