Moxa Technologies AirWorks AWK-1137C - Advanced WLAN Settings

AirWorks AWK-1137C Web Console Configuration
3-23
PEAP
There are a few differences in
the TTLS and PEAP inner
authentication procedures.
TTLS uses the encrypted
channel to exchange
attribute
-value pairs (AVPs),
while PEAP uses the encrypted
channel to start a second EAP
exchange inside of the tunnel.
The
AWK-1137C provides
MS
-CHAP-V2 merely as an
EAP method for inner
authentication.
Inner EAP protocol
Setting Description Factory Default
MS-CHAP-V2 Microsoft CHAP version 2 is used MS-CHAP-V2
Anonymous
Setting Description Factory Default
Max. of 31 characters A distinct name used for outer authentication None
User name & Password
Setting Description Factory Default
- User name and password used for internal authentication None
Advanced WLAN Settings
Additional wireless-related parameters are presented in this section to help you set up your wireless network
in detail.