Moxa Technologies AirWorks AWK-1137C User Manual

AirWorks AWK-1137C Web Console Configuration
3-17
NOTE
When you switch to
Client, Client-Router, or Slave modes, a Site Survey
button will be available on the
Basic WLAN Setup
panel. Click the “Site Survey” button to view information about available APs, as
shown in
the following figure. You can click on the SSID of an entity and bring
the value of its SSID onto the SSID fiel
d
of
the Basic WLAN Setup page. Click the Refresh button to re-scan and update the table.
RF type
Setting Description Factory Default
2.4 GHz
B Only supports the IEEE 802.11b standard B/G/N Mixed
G Only supports the IEEE 802.11g standard
B/G Mixed
Supports IEEE 802.11b/g standards, but 802.11g may operate
at a slower speed if when 802.11b clients are on the network
G/N Mixed Supports IEEE 802.11g/n standards, but 802.11n
may operate
at a slower speed if 802.11g clients are on the network
B/G/N Mixed Supports IEEE 802.11b/g/n standards, but 802.11g/n may
operate at a slower speed if 802.11b clients are on the network
N Only (2.4 GHz) Only supports the 2.4 GHz IEEE 802.11n standard

Moxa Technologies AirWorks AWK-1137C Specifications

General

Brand	Moxa Technologies
Model	AirWorks AWK-1137C
Category	Wireless Access Point
Language	English