Moxa Technologies AirWorks AWK-1137C - Page 63

AirWorks AWK-1137C Web Console Configuration
3-49
DHCP server
Setting Description Factory Default
Enable Enables AWK-1137C as a DHCP server Disable
Disable Disable DHCP server function
Default gateway
Setting Description Factory Default
IP address of a default
gateway
The IP address of the router that connects to an outside
network
None
Subnet mask
Setting Description Factory Default
subnet mask Identifies the type of sub-network (e.g., 255.255.0.0 for a
Class B network, or 255.255.255.0 for a Class C network)
None
Primary/ Secondary DNS server
Setting Description Factory Default
IP address of Primary/
Secondary DNS server
The IP address of the DNS Server used by your network. After
entering the DNS Server’s IP address, you can use URL as well.
The Secondary DNS server will be used if the Primary DNS
server fails to connect.
None
Start IP address
Setting Description Factory Default
IP address Indicates the IP address which AWK-1137C can start assigning None
Maximum number of users
Setting Description Factory Default
1 to 999 Specifies how many IP address can be assigned continuously None