NPort IA5150A/IA5250A Series Configuring NPort Administrator
ATTENTION
The COM Grouping function only supports Windows NT, 2000, and later. The maximum number of ports for
each group is 32.
3. Select the Grouping selected port(s) together checkbox.
4. On the COM Grouping page, you can set “Read” and “Write” permissions for every serial port. It is
necessary to set Signal Status in order to control the data transmission with specified control signals (e.g.,
DTR/RTS). You can assign one serial port whose signals will be taken into account by the COM Group.
To Next Page
Loading...
