USER MANUAL NOVAcompact
MRU GmbH, D-74172 Neckarsulm
Export measurements to a SD card (option)
By confirming with the F2 key the data transmission / export on the SD card is started.
During the data export the display reads „please wait”. A write error to SD card is reported by
the instrument. Make sure that the SD card is not write protected.
The data are stored as a csv-file (e.g., EMI01032.csv) on the SD card. The filename exists of a
sequential number which fixes the device.
This file is editable on your Notebook/PC with a program like e.g. Microsoft® EXCEL or
OpenOffice® Calc.
With possible problems with the using of your computer programs please read your software
documentations or ask your software dealer.
To Next Page
Loading...
