Description
ALTAIR 5X/ALTAIR 5X IR
16
GB
On the colour display, each displayed gas will have its own Sensor Life indicator. If
a sensor is in end-of-life warning, its indicator will be an orange ♥. If a sensor has
reached end-of-life, it is in alarm and its Sensor Life indicator will be a continuous
blinking red ♥.
See chapter 3.8 for additional details on Sensor Life determination and indication.
Backlight
The backlight automatically activates when any front panel button is pressed and
remains ON for the duration of user-selected timeout.
This duration can be changed using the SETUP - INSTRUMENT MODE
[→ chapter 3.4] or through MSA Link software.
Operating Beep
Operating Beep
This operating beep activates every 30 seconds by momentarily beeping the horn
and flashing the alarm LEDs under the following conditions:
- Operating beep is enabled
- Device is on normal Measure Gases page
- Device is not in battery warning
- Device is not in gas alarm
To Next Page
