MSA ALTAIR 5X - 3.5 MSA Link Operation

MSA
Operation
ALTAIR 5X/ALTAIR 5X IR
46
GB
Setting the Contrast [monochrome display]
(1) Press  or  button to adjust the contrast levels.
Press ON/OFF button to confirm the contrast level.
Setting Backlight
(1) Press the ON/OFF button to enter setup.
Change option by pressing the  or  button.
Press the ON/OFF button to enter.
Change timeout by pressing the  or  button.
Press ON/OFF button to confirm timeout.
Back To Main Menu
There are three options at this point:
3.5 MSA Link Operation
Connecting device to PC
(1) Switch on the device and align the Datalink Communication port on the device
to the IR interface of the PC.
(2) Use the MSA Link software to communicate with the device.
See MSA Link documentation for detailed instructions.
the  button Sensor Options menu
the  button Previous Setup page in the Instrument Options menu
the ON/OFF button Instrument Options menu