MSA ALTAIR 5X - Page 45

OperationMSA
ALTAIR 5X/ALTAIR 5X IR
GB
45
Time and Date Setup
This option is for setting the device time and date. The device first prompts to set
the time and then it prompts for the date.
(1) Press the ON/OFF button to enter setup.
(2) Change hours by pressing the  or  button.
(3) Confirm with the ON/OFF button.
(4) Change minutes by pressing the  or  button.
(5) Confirm with the ON/OFF button.
 The device goes to the Set Date Page.
(6) Change month, date and year by pressing the  or  button and confirming
with the ON/OFF button.
 The device goes to the next Setup Page.
Setting Datalog Intervals
This option is for setting the intervals at which all the readings will be logged.
(1) Press the ON/OFF button to enter setup.
(2) Change interval by pressing the  or  button.
(3) Confirm with the ON/OFF button.
 The device goes to the next Setup Page.
Setting Stealth Mode
Stealth mode disables the visual, audible and vibrating alarms.
(1) Press the ON/OFF button to change mode [ON/OFF].
(2) Press the  button to go to the next page or the  button to return to previous
page.
Setting Operating Beep
(1) Press the ON/OFF button to change mode [ON/OFF].
(2) Press the  button to go to the next page or the  button to return to previous
page.
The time can be set up for either regular AM/PM or military time
[through MSA Link software]. AM/PM time is the default setting.