MSA ALTAIR 5X - Page 44

MSA
Operation
ALTAIR 5X/ALTAIR 5X IR
44
GB
Setting Sensor Options
(1) Press the ON/OFF button to enter setup.
 Following screen displays:
Fig. 10 Sensor Alarm Setup
(2) Press the  button to select sensor, press the ON/OFF button to make chang-
es.
 The sensor information is displayed and the sensor can be enabled or dis-
abled.
(3) Change status by pressing the  or  button.
(4) Press the ON/OFF button to confirm and advance to next screen
[next sensor].
(5) Perform the sequence for all other sensors.
 After setting up the last sensor the device goes to the next Setup Page.
Language Setup
This option is for setting the language of the device.
(1) Press the ON/OFF button to enter setup.
Change language by pressing the  or  button.
Confirm with the ON/OFF button.
The device goes to the next Setup Page.
Other operations such as changing the gas type [Methane, Butane,
Propane etc. for the combustible sensor] and units [ppm to mg/m
3
] are
only possible using the MSA Link software.