MSA ALTAIR 5X - 8 Changeable Feature Summary; Initial Setting; Setup Path to Change this Setting; Changeable with MSA link?

Changeable Feature SummaryMSA
ALTAIR 5X/ALTAIR 5X IR
GB
89
8 Changeable Feature Summary
Feature Initial Setting
Setup Path to Change
this Setting
Changeable
with MSA
link?
Setup Password 672 - Yes
Vibrating Alarm ON ALARM OPTIONS Yes
Horn Alarm ON ALARM OPTIONS Yes
LED Alarm ON ALARM OPTIONS Yes
Safe LED [green] ON - Yes
Operating Beep [alarm LEDs
& horn]
OFF INSTRUMENT OPTIONS Yes
Stealth OFF INSTRUMENT OPTIONS No
MotionAlert - Access Allowed ALARM OPTIONS No
MotionAlert OFF Use  button from
MEASURE page
No
Sensor Alarm Levels ALARM OPTIONS / SEN-
SOR ALARM SETUP
Yes
Enable / Disable High & Low
Alarms
Enabled - Yes
Turn Sensors ON / OFF ON INSTRUMENT OPTIONS
/ SENSOR SETUP
Yes
Show Peak ON - Yes
Show STEL, TWA ON - Yes
Cal Cylinder Setup CAL OPTIONS Yes
Show Last Cal Date ON CAL OPTIONS Yes
Show Cal Due ON CAL OPTIONS No
Cal Password Required OFF CAL OPTIONS No
Backlight Enabled - No
Backlight Duration 10 s INSTRUMENT OPTIONS Yes
Display Contrast Factory-set INSTRUMENT OPTIONS No
Language User-set INSTRUMENT OPTIONS No
Date, Time User-set INSTRUMENT OPTIONS Yes
Datalog Interval 3 min INSTRUMENT OPTIONS Yes
Custom Logo Screen Factory-set Certified service center Yes