46
Temposonics
®
R-Series SSI
Operation Manual
Temposonics
®
R-Series SSI
Operation Manual
6. Maintenance and troubleshooting
6.1 Error conditions, troubleshooting
See “Fig. 51: LED display” on page 42.
6.2 Maintenance
The sensor is maintenance-free.
6.3 Repair
Repairs of the sensor may only be performed by MTS Sensors or
a repair facility explicitly authorized by MTS Sensors.
6.4 List of spare parts
No spare parts are available for this sensor.
6.5 Transport and storage
The conditions of transport and storage of the sensor match the
operating conditions mentioned in this document.
26
To select
the “synchronous mode 3”, activate the check box
Extrapolation/SyncStart first and after that Extrapolation (real).
The function of the “synchronous mode 3” is similar to “synchro
nous mode 2”. For “synchronous mode 3” each delay will be com-
pensated.
Fig. 62: MTS SSI-Configurator, Measurement 2, choose synchronous mode 3
MTS SSI-Configurator R-Series order code
Extrapolation (real) complies with Synchronous mode 3
7. Removal from service / dismantling
The product contains electronic components and must be disposed
of in accordance with the local regulations.
26
To Next Page
Loading...
