MTU 12V2000M93 User Manual (English)

Questions and Answers:

S
Stephanie DavisAug 19, 2025
What to do if MTU Engine does not turn when starter is actuated?
- D
  Daniel JonesSep 12, 2025
  If the MTU Engine doesn't turn when starting, possible causes include a low or faulty battery (charge or replace it), faulty cable connections (check if they are properly secured), defective engine cabling or starter (check cable connections), loose plug connections on the Engine Control Unit or Engine Interface Module (check connections), a defective fuse F1 in the engine wiring harness (check and replace if needed, then restart), or a blocked running gear.
T
Tyler MccannAug 21, 2025
Why MTU Engine does not reach nominal speed?
- E
  Edwin FergusonAug 21, 2025
  If the MTU Engine does not reach nominal speed, it could be due to a clogged fuel prefilter (replace it), a clogged easy-change fuel filter (replace it), a clogged air filter (check signal ring position of service indicator), a faulty injector (replace it), defective engine cabling (check it), or engine overload.
J
Julie JamesAug 23, 2025
What to do if MTU Engine turns on starting but does not fire?
- J
  Joseph BrownAug 23, 2025
  If the MTU Engine turns on starting but does not fire, the possible reasons are: low or faulty battery (charge or replace), defective engine cabling, air in the fuel system (vent fuel system), or a defective Engine Control Unit.
D
Daniel HarrisAug 26, 2025
Why MTU Engine fires unevenly?
- M
  Morgan LeeAug 26, 2025
  If the MTU Engine fires unevenly, it could be due to a faulty injector (replace it), defective engine cabling (check it), air in the fuel system (vent fuel system) or a defective Engine Control Unit.
J
John Shaw DVMAug 27, 2025
How to fix unsteady MTU Engine speed?
- W
  wrightaliciaAug 27, 2025
  If the MTU Engine speed is not steady, the possible causes are a faulty injector (replace it), a defective speed transmitter, air in the fuel system (vent fuel system), or a defective Engine Control Unit.
C
Chelsey AveryAug 30, 2025
Why MTU Engine emits black exhaust gas?
- G
  Gary SmithAug 30, 2025
  If the MTU Engine emits black exhaust gas, the causes might be a clogged air filter (check signal ring position of service indicator), a faulty injector (replace it), or engine overload.
J
James GallowaySep 1, 2025
What to do if illuminated pushbutton “Replace filter element” is lit on MTU Engine?
- A
  adamochoaSep 1, 2025
  If the illuminated pushbutton “Replace filter element” is lit on your MTU Engine, it means the maximum permissible differential pressure of 1.5 bar was exceeded. Replace the coalescer filter element and then press the illuminated pushbutton “Replace filter element” to acknowledge.
K
Kristin SwansonSep 3, 2025
What causes blue exhaust gas from MTU Engine?
- E
  Elizabeth GonzalezSep 3, 2025
  If the MTU Engine emits blue exhaust gas, it may be caused by too much oil in the engine (drain engine oil), a clogged oil separator or oil-preseparator of crankcase breather (clean preseparator and replace oil separator element), or defective exhaust turbocharger, cylinder head, piston rings, or cylinder liner.
M
Michael HamiltonSep 5, 2025
Why is charge-air temperature too high in MTU Engine?
- C
  Carol AcostaSep 5, 2025
  If the charge-air temperature is too high in your MTU Engine, it could be due to an incorrect coolant concentration (check with MTU test kit), a dirty intercooler, or an air-intake temperature in the engine room that is too high (check fans and air supply/ventilation ducts).
S
Susan MartinezSep 7, 2025
Why MTU Engine emits white exhaust gas?
- T
  Tammy HoustonSep 7, 2025
  If the MTU Engine emits white exhaust gas, it could be because the engine is not at operating temperature (run engine to reach operating temperature), there is water in the fuel (drain fuel prefilter), or the intercooler is leaking.