Mueller ISOBUS SPRAYER-Controller MIDI 3.0 - Page 28

5
Basic control principles
Screen structure
28
V1.20170116
30303187-02-EN
Icon
Meaning
(not
flashing)
Stirrer has been stopped. Cause: Stopped by the driver.
Stirrer is working.
Fresh water tank is being emptied.
Low-pressure cleaner is being used.
The ring line is being rinsed.
Working lights are on.
Nozzles used in Vario mode.
Nozzles used in Select mode.
Nozzle cleaning activated.
Intended drop size with Airtec or in Vario mode.
Fan switched off.
Fan switched on.
Airtec icons
Icon
Meaning
Current air pressure
System is increasing the air pressure.
System is reducing the air pressure.