Muller Elektronik BASIC-Terminal User Manual

Configuring the terminal in the Service application
GPS Receiver
7
Copyright © Müller-Elektronik GmbH & Co.KG 31
⇨ The contents of the folder will be displayed.
The names of the folders are the ISO IDs of the applications whose temporary data they
store.
4. Select the desired file.
5.
- Delete file.
⇨ Deleting file.
6.
- Restart terminal.
GPS Receiver
When you connect a GPS Receiver to the terminal, you must activate and configure it.
Activating the GPS Receiver
In order to activate the GPS Receiver, you must first activate its driver.
A driver is a small program that controls connected farm equipment. The drivers for the farm
equipment supplied by Müller-Elektronik are pre-installed on the terminal.
1. Switch to the "Driver settings" screen:
| Service | Driver settings
⇨ The following screen will appear:
2. Select "GPS".
3. Click on "GPS".
7.10
7.10.1
Procedure

Muller Elektronik BASIC-Terminal Specifications

General

Brand	Muller Elektronik
Model	BASIC-Terminal
Category	Touch terminals
Language	English