Muller Elektronik BASIC-Terminal User Manual

Configuring the terminal in the Service application
Configuring FarmPilot
7
Copyright © Müller-Elektronik GmbH & Co.KG 41
Configuring FarmPilot
Only read this chapter once you have upgraded the BASIC-Terminal to a BASIC-Terminal TOP. The
function described in this chapter can only be used on an upgraded terminal.
FarmPilot is an internet portal which allows software on a farm computer to exchange data with
machines via a mobile phone network. Operating data are stored in a central location on the portal
and are presented clearly to the user.
Before you can use FarmPilot in conjunction with your terminal, you must complete the following
steps:
▪ Purchase a SIM card and have it activated.
▪ Activate FarmPilot
▪ Enter your FarmPilot access data
Refer to the following chapters to learn how to perform these steps.
Activating FarmPilot
To activate FarmPilot on your terminal, you must first activate its driver.
NOTICE
High costs from prolonged data transfer
If you do not have a flatrate in your mobile phone contract, continuous use of FarmPilot can lead to
high costs.
If your flatrate has a data volume limit, continuous use of FarmPilot can quickly use up your data
volume limit.
◦ Deactivate the FarmPilot driver, when you are not using the portal.
1. Switch to the "Driver settings" screen:
| Service | Driver settings
⇨ The following screen will appear:
2. Click on "FarmPilot".
3. Click on the "TPD" driver.
⇨ Next to the driver the icon
will appear.
4.
- Restart terminal.
7.16
7.16.1
Procedure

Muller Elektronik BASIC-Terminal Specifications

General

Brand	Muller Elektronik
Model	BASIC-Terminal
Category	Touch terminals
Language	English