Muller Elektronik BASIC-Terminal User Manual

Contents
4 Copyright © Müller-Elektronik GmbH & Co.KG
7.3 Changing the language 224
7.4 Adjusting the brightness for day or night mode
225
7.5 Configuring the basic display settings
226
7.6 Activating and deactivating applications
227
7.7 Activating licences for full v
ersions of the software 228
7.8 Deleting files from th
e USB flash drive 229
7.9 Deleting pools
230
7.10 GPS Receiver
231
7.10.1 Activating the GPS Receiver 231
7.10.2 Configuring the DGPS Receiver A100 232
7.11 Configuring the "GPS TILT-Module" terrain compensation 234
7.12 Screenshots
235
7.12.1 Configuring the screenshots function 235
7.12.2 Creating screenshots 236
7.13 Activating the "Diagnostics" function 236
7.13.1 Jobcomputer diagnostics 237
Sending diagnostic data to the portal
237
7.13.2 CAN-Trace settings 237
7.14 Activating an external LightBar 238
7.15 Camera
239
7.15.1 Activating a camera 239
7.15.2 Operating the camera 240
7.16 Configuring FarmPilot 241
7.16.1 Activating FarmPilot 241
7.16.2 Configuring the connection with FarmPilot 242
7.16.3 Entering data in the FarmPilot access data section 243
7.16.4 Configuring the GPRS connection manually 244
8 Maintenance and servicing 246
8.1 Servicing and cleaning the terminal
246
8.2 Disposing of the unit
246
8.3 Checking the software version
246
8.4 Technical specifications
246
8.4.1 Technical specifications of the terminal 246
8.4.2 Pin assignment of ports A and B 247
8.4.3 Pin assignment of port C 248
8.4.4 Pin assignment of camera ports 1 and 2 249
9 Notes 251

Muller Elektronik BASIC-Terminal Specifications

General

Brand	Muller Elektronik
Model	BASIC-Terminal
Category	Touch terminals
Language	English