Basic control principles
Layout of work screen
- Field sprayer on the headlands
Other causes are also possible.
Stirrer has been stopped. Cause: Fill level [➙ 57] is too low.
Stirrer has been stopped. Cause: Stopped by the driver.
Fresh water tank is being emptied.
Low-pressure cleaner is being used.
High-pressure cleaner is being used.
The ring line is being rinsed.
Nozzles used in Vario mode.
Nozzles used in Select mode.
Nozzle cleaning activated.
Intended drop size with Airtec or in Vario mode.
To Next Page
Loading...