Muller Elektronik MIDI 3.0 User Manual

Table of contents
30303187-02-EN
V1.20180921
5
7.1.10
“Tank Size” parameter
57
7.1.11
“Tank level alarm” parameter
57
7.1.12
“Impulses Main Flow” parameter
57
7.1.13
“Stirring off Below” parameter
57
7.1.14
“Maximum Wind Speed” parameter
57
7.1.15
“Extremity nozzles set” parameter
57
7.1.16
“Pump” parameter
58
7.1.17
“Section Control” parameter
58
7.1.18
“Filling Mode” parameter
58
7.1.19
“Circulation Type” parameter
58
7.2
Configuring the control units
58
7.3
Calibrating the flow meter
59
7.3.1
Calibrating the flow meter with the tank method
59
7.3.2
Calibrating the flow meter with the nozzle method
61
7.3.3
Manually entering the number of impulses per liter for the flow meter
63
7.3.4
Combining the flow meter with the pressure sensor
63
“Flow Tolerance” parameter
64
“Threshold Flow” parameter
64
7.4
Selecting and configuring the speed sensor
64
7.4.1
Selecting the speed source
64
7.4.2
Calibrating the speed sensor with the 100m method
65
7.4.3
Configuring the reverse driving sensor
65
7.4.4
“Simulated Speed” function
66
7.5
Configuring sections
66
7.5.1
Entering the number of nozzles per section
66
7.5.2
Switching sections off permanently
67
7.5.3
Permanently switching off a section using a sensor
68
7.5.4
System delay when switching the sections
68
“Delay on Start” parameter
68
“Delay on Stop” parameter
68
7.5.5
Changing the display of areas on the terminal
68
7.6
Configuring the nozzles - for field sprayers with pressure sensor regulation
69
7.6.1
Nozzle assistant
69
7.6.2
Calibrate the nozzles
71
7.7
Extremity nozzles
72
7.7.1
Configuring the extremity nozzles
73
7.7.2
Operating the extremity nozzles
74
7.8
Configuring AIRTEC
75
7.9
Entering the field sprayer geometry
75
7.10
Calibrating the sensors for reproducing the boom slope
76
7.11
Field sprayer with two circulations and job computers
77
7.11.1
Identifying the job computer
78
7.11.2
Geometry on a field sprayer with two job computers
79
7.12
Activating licenses
80
7.13
Assigning the joystick buttons
80

Muller Elektronik MIDI 3.0 Specifications

General

Brand	Muller Elektronik
Model	MIDI 3.0
Category	Controller
Language	English