Part Number 9294699 12/16/15 59
Section 4 Maintenance
Reinstall Inventory
1. Retrieve product holders from refrigerated storage and
reinstall each into their correct slot number.
2. Remove splash shield and reinstall center grate into the
dispense area.
3. Place a large empty cup under the dispensing nozzles.
4. Press the Down Arrow, then press the Green Check
when ready to select product slots to prime.
Select Slots to Prime
A. Touch each slot that needs to be primed. Only the
slots that were selected at the beginning of this
sequence and flushed will be available as a choice.
• Selected slots will become highlighted in green.
A
B
NOTE: If a line that does not have product assigned was
cleaned, it will not need priming.
B. The Green Check will appear once a slot has been
selected. Once all the slots to be primed have been
selected, press the Green Check to continue.
This will automatically prime each line that was selected
with product. The screen will read PRIMING SLOT X. Each
slot will change from PURGED to PRIMED.
When priming has completed the Prime Complete screen
will appear automatically.
1
2
3
4
5
6
7
8
To Next Page
Loading...
Need help?
General
