Munters Trio Poultry Controller - Defining the Stir Fan

© Munters AB, 2020 52
7.3.2 D
EFINING THE
S
TIR
F
AN
 Define one relay or port as a stir fan (refer to Mapping Devices, page 44).
• On Off Stir Fan
• 0 – 10 Volt Stir Fan
7.3.2.1 On Off Stir Fan
• Define:
o
KWh: This field displays the amount of kilowatts used. Read-only.
o
Operation: Define the relay mode.
• The status shows if the stir fan is currently operating.