© Munters AB, 2020 62
7.7
Inlets, Tunnel Doors, Outlets
•
Mapping the Potentiometers
•
Defining the Inlets/Tunnel Doors
•
Defining the Outlet
7.7.1
M
APPING THE
P
OTENTIOMETERS
Define up to four analogue ports as potentiometers.
As an option, potentiometers enable exact positioning of relay-controlled inlets\tunnel doors when
calibrating. If:
•
potentiometers are not employed or
•
there is a potentiometer failure
opening and closing times are used to calibrate the inlets/tunnel doors.
•
Enable/disable the potentiometer.