© Munters AB, 2020 54
7.4
Sensors
•
Defining the Ammonia Sensor
•
Defining the CO2 Sensor
•
Defining the Humidity Sensor
•
Defining the Water Meter Sensor
•
Defining the Gas Meter Sensors
7.4.1
D
EFINING THE
A
MMONIA
S
ENSOR
Define one analog input port as an ammonia sensor (refer to Mapping Devices, page 44).
•
Define:
o
Offset: This is an optional correction for the ammonia sensor. Range: -10 to +10 ppm
o
Enable Mode: Enable/disable the sensor.
•
The ammonia reading shows the measured amount, including the offset.