Manual MVK-MP
62 V 3.5
Analog outputs
Conversion time .................................................. approx. 1 ms
Signal delay ......................................................... approx. 5 ms
Pin 4 .................................................................... analog current output
Pin 2 .................................................................... not used
Current range ...................................................... 0 … 20 mA or 4 … 20 mA
............................................................................ (11 Bits)
max. analog output current ................................. 20 mA
Data format.......................................................... 11 bits, Motorola or optionally Intel format
relative error of output value ............................... ±0.6 % of end-scale value
relative error of output value at 55°C ................. ±0.8 % of end-scale value
relative error of output value
with EMC conditions ............................................ ±1 % of end-scale value
Load resistance ................................................... 500 Ω
max. capacitive load ............................................ 1 µF
To Next Page
Loading...
Need help?
General
