MUTOH Rockhopper 3 - Ethernet Card Errors; Mainboard Related Errors; E211 - Incompatible Hardware; E256 - Mode Not Found

Troubleshooting
31 AP-74700 – Rev. 1.0 – 10/03/2008
2.8 ETHERNET CARD ERRORS
E128 – ONLINE Error
E129 – EthROM error
E130 – EthRAM error
E131 – EthBank RAM error
E132 – EthNIC chip error
E133 – EthLback error
The Ethernet card is failing Æ Replace Ethernet card
2.9 MAINBOARD RELATED ERRORS
2.9.1 E211 – Incompatible hardware
Recent firmwares are always compatible with all mainboard-revisions.
• Always use the correct firmware version for the correct hardware:
o Non-Rohs mainboards have the extension SP (e.g. 3.00sp)
o Rohs-compliant mainboards have the extension SX (e.g. 3.00sx)
• Always use the latest firmware-version. Older firmware-versions might possibly not compatible
with newer hardware.
2.9.2 E256 – Mode not found
Problems related to the SIMM card or wallet system.
• Check the specific error-number via diagnostics mode > Chipmgr
• Proceed to the SIMM-Card diagnostics chapter
2.9.3 E257 – Mode not available
Invalid machine settings
Contact the Mutoh service department
2.9.4 E258 – Mode Init problem
Contact the Mutoh service department.