MUTOH VJ-628 - 1-3 Initial Change

MUTOH Status Monitor
Installation Wizard Operation Manual
3 Installation Wizard
3-135
MSMIE-A-01
1-3 Initial Change
Set the adjustment value for the initial adjustment.
No
Name
Contents
1
Next
Sets the adjustment value for the initial adjustment to the printer.
2
Back
Go back to the previous menu.
3
Adjustment Value
Enter the adjustment value for the initial change.
Adjustment range: ±50mm from the initial print length
(in increment of 0.1mm)
e.g.) if the initial print feeding length is set to 250mm:
initial change range: 200.0mm – 300.0mm
2
3
1