MUTOH VJ-628 - 2). Main Menu for VJ-426 UF;626 UF;XPJ-461 UF;661 UF

MUTOH Status Monitor
Installation Wizard Operation Manual
3 Installation Wizard
3-3
MSMIE-A-01
2). Main Menu for VJ-426UF/626UF/XPJ-461UF/661UF
No
Name
Contents
1
Introduction
Displays the introduction of the Installation Wizard.
Click [Next] to continue.
2
Initial Setting (MSM)
Performs the MSM initial setting.
Click [Next] in this menu to launch the Initial Setting Wizard.
For the details, see “MUTOH Status Monitor Design Specification”.
3
Activation
Performs the printer activation.
Click [Next] in this menu to launch the Activation Wizard.
For the details, see “MUTOH Status Monitor Design Specification”.
* If the printer activation was already performed, skip this menu.
4-5
Initial Charge
Performs the initial ink charge and printer adjustments.
Click [Next] to proceed each menu.
* If the initial ink charge was already performed, skip the “Initial
Charge” menu.
6
Complete
Exits the Installation Wizard in this menu.
7
Next
Go to the “Initial Setting” menu.
8
Exit
Terminates the Installation Wizard.
If you terminate the Installation Wizard without performing the
followings, your printer cannot be operated:
・Activation ・Initial Charge
1
2
3
5
4
6
7
8