MUTOH VJ-628 - 3-4 Initial Charge; 1). When using Smart;C; 1-1 Smart;C Update Confirmation

MUTOH Status Monitor
Installation Wizard Operation Manual
3 Installation Wizard
3-24
MSMIE-A-01
3-4 Initial Charge
1). When using Smart/C
When the printer is set to using Smart/C, go to the Smart/C Wizard to update Smart/C before performing the
initial ink charge.
When the printer is not set to using Smart/C, proceed to the Initial Charge Wizard.
1-1 Smart/C Update Confirmation
After clicking [Next] in the Initial Charge Wizard, obtain the printer information to check the Smart/C amount.
When the Smart/C amount is not enough for the initial ink charge, go to the Smart/C Wizard.
When the Smart/C amount is enough for the initial ink charge, update the Smart/C amount or display the
confirmation message below.
No.
Name
Description
1
Yes
Go to the Smart/C Wizard.
2
No
Go to the Initial Charge Wizard.
Required Smart/C amount for Initial Ink Charge:
Printer Model
Smart/C Amount [ml]
Smart/C Amount [%]
VJ-628 / 628X / 628MP
200 [ml]
1 [%]
VJ-426UF / 626UF
400 [ml]
2 [%]
.
1
2