EasyManuals Logo

Nanni N4.40 User Manual

Nanni N4.40
175 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
GENERAL
03-M-E3B, 03-M-DI-E3B, 03-M-E3BG, WSM
G-19
Replacement of Oil Filter Cartridge (for 124 mm (4.88 in.) Depth
Oil Pan)
[D1503-M, D1703-M, D1803-M, V2003-M, V2203-M, V2403-M,
V2403-M-T, D1703-M-BG, V2003-M-BG, V2003-M-T-BG,
V2203-M-BG, V2403-M-BG]
CAUTION
Make sure that you stop the engine before you replace the
oil filter cartridge.
1. Remove the oil filter cartridge (1) with the filter wrench.
2. Apply a thin layer of oil on the new cartridge gasket.
3. Install the new cartridge by hand. Do not tighten too much
because it can cause deformation of the rubber gasket.
4. After you replace the cartridge, the engine oil usually decrease
by a small level. Make sure that the engine oil does not flow
through the seal and read the oil level on the dipstick.
5. Fill the engine oil until the specified level.
IMPORTANT
To prevent serious damage to the engine, use only
KUBOTA genuine filters or its equivalent.
M00000003GEG0022US1
Replacement of Oil Filter Cartridge (for 90 mm (3.5 in.) Depth
Oil Pan)
[D1803-M-DI, V2403-M-DI, V2403-M-DI-T]
CAUTION
Make sure that you stop the engine before you replace the
oil filter cartridge.
1. Remove the oil filter cartridge (1) with the filter wrench.
2. Apply a thin layer of oil on the new cartridge gasket.
3. Install the new cartridge by hand. Do not tighten too much
because it can cause deformation of the rubber gasket.
4. After you replace the cartridge, the engine oil usually decrease
by a small level. Make sure that the engine oil does not flow
through the seal and read the oil level on the dipstick.
5. Fill the engine oil until the specified level.
IMPORTANT
To prevent serious damage to the engine, use only
KUBOTA genuine filters or its equivalent.
M00000003GEG0023US1
Check of Radiator Hoses and Clamp Bands
1. Make sure that the radiator hoses connections are correct for
every 200 hours of operation or every 6 months, whichever
comes first.
2. If the clamp is loose, apply oil to the threads and tighten it again
correctly.
3. The radiator hose material is rubber and deteriorates naturally.
You must replace the radiator hose every 2 years. Also replace
the clamp and tighten it correctly.
M00000003GEG0024US1
(1) Oil Filter Cartridge
(1) Oil Filter Cartridge
(1) Upper Hose (2) Lower Hose
KiSC issued 06, 2009 A

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nanni N4.40 and is the answer not in the manual?

Nanni N4.40 Specifications

General IconGeneral
BrandNanni
ModelN4.40
CategoryEngine
LanguageEnglish

Related product manuals