Native Instruments MASCHINE STUDIO Getting Started

▪ The Retrigger setting lets you decide for the next loop range whether the playhead will start
from the point equivalent to where the playhead leaves the current Scene or from the be-
ginning of the loop range. The former (default setting) ensures that the global groove of
your track is not interrupted!
8.3.2.1 Jumping to Other Scenes in the MASCHINE Software
In the Arranger, you will find the SYNC menu and the Retrigger check box in the header:
The SYNC and Retrgger controls.
►
To adjust the Scene Sync setting, click the SYNC menu and select the desired entry in
the menu, for example Scene.
→
The next time you select a new Scene or loop range, the switch will happen on the next
Scene.
►
To enable/disable the Retrigger setting, click the Retrigger check box from the drop-down
menu.
→
The next time you select a new Scene or loop range, it will start from the beginning.
8.3.2.2 Jumping to Other Scenes using the Controller
To adjust the Scene Sync setting:
1. Press and hold GRID to enter Grid mode (or pin it by pressing GRID + Button 1).
Creating a Song Using Scenes
Using Scenes to Play Live
MASCHINE STUDIO - Getting Started - 122

Native Instruments MASCHINE STUDIO Specifications

General

Brand	Native Instruments
Model	MASCHINE STUDIO
Category	Recording Equipment
Language	English