6. Scroll down the Result list and double-click EK-TL A Kit to load this drum kit into Group
A.
2.1.2 Loading a Drum Kit from the Factory Library using the Controller
On your controller, do the following:
1. Press button A on the left of your controller to select the first Group slot. This is where we
are going to load our drum kit. Button A should be lit to indicate that it is selected.
2. Press the BROWSE button at the top left of your controller.
The BROWSE button lights up. In the left display, you now are presented with a selection
of choices.
First Steps
Loading a Drum Kit from the Factory Library
MASCHINE STUDIO - Getting Started - 22
To Next Page
Loading...
