Why won't the heart rate be displayed on my Nautilus T616?
If your Nautilus Treadmill operates but doesn't display your heart rate when using the contact sensors: * Ensure your hands are centered on the HR sensors and kept still, applying relatively equal pressure to each side. * Dry or calloused hands can impede the sensors. Use a conductive electrode cream to improve contact.
What to do if my Nautilus T616 Treadmill hesitates or the walking belt slips?
If your Nautilus Treadmill hesitates or the walking belt slips during use, adjust the belt tension at the rear of the machine. Refer to the procedure for adjusting belt tension in this manual.
Why is the speed display inaccurate on my Nautilus T616 Treadmill?
If the speed display on your Nautilus Treadmill is not accurate, it might be set to the wrong unit of measure (English/Metric). Change the display to show the correct units.
What to do if my Nautilus Treadmill console shuts off while in use?
If your Nautilus Treadmill console shuts off during use, check the following: * Ensure the treadmill is plugged into a functioning wall outlet by testing the outlet with a known working device. * Inspect the connection at the front of the unit, ensuring it's secure and undamaged; replace if necessary. * Check the data cable for any damage; replace if wires are cut or crimped. * Confirm the data cable connections are secure and properly oriented. * Try resetting the machine by unplugging it from the electrical outlet for 3 minutes, then reconnecting it.
Why does the walking belt slip on my Nautilus T616 Treadmill when I use it?
If you experience hesitation or the walking belt slips during use, adjust the belt tension at the rear of the machine.
What to do if the belt stops moving on my Nautilus Treadmill while I'm using it?
First, make sure the Safety Key is properly plugged into the console. The unit might be overloaded, causing it to draw too much current and shut off to protect the motor. To resolve this, lubricate the belt according to the maintenance schedule, ensure the walking belt tension is correct, and then restart the unit.
What to do if my Nautilus Treadmill belt stops moving?
If the belt on your Nautilus Treadmill stops moving during use: * Ensure the safety key is properly plugged into the console. * The unit may be overloaded. Lubricate the belt according to the maintenance schedule, check the belt tension, and restart the unit.
What to do if my Nautilus T616 Treadmill won't turn on?
First, ensure the treadmill is plugged into a working wall outlet by testing the outlet with another device. Check the power cord and connections for any damage, replacing them if necessary. Inspect the cable wires for crimps or cuts and replace the cable if damaged. Ensure the cable is securely connected and properly oriented, with the latch snapped into place. Examine the console display for cracks or damage, replacing the console if needed. If the console shows only a partial display and all connections are secure, consider replacing the console.
General| Maximum speed | 19.3 km/h |
|---|---|
| Number of programs | 26 |
| Maximum user weight | 136 kg |
| Built-in display | Yes |
Weight and Dimensions| Depth | 1960 mm |
|---|---|
| Width | 894 mm |
| Height | 1463 mm |
| Weight | 97500 g |
| Running area (W x L) | 508 x 1524 mm |
To Next Page
