EasyManuals Logo
Home>Navistar>Trucks>WorkStar Series

Navistar WorkStar Series User Manual

Navistar WorkStar Series
258 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #105 background imageLoading...
Page #105 background image
Operation
Shorten the belt after it is connected by pulling on the loose end
until the belt is snug and comfortable.
To release: Push in the button release latch to release the seat
belt.
Care of Seat Belts
WARNING
Do not bleach or re-dye seat belt webbing.
Bleaching or re-dying may cause a weakening
of the webbing, resulting in personal injury or
death.
Clean the belts occasionally with mild soap; do not use cleaning
solvents or abrasives.
The entire seat belt assembly should be inspected periodically
for corrosion, wear, fraying, or weak spots. The retractor, latch,
and buckle should be checked for proper function, and all seat
belt mounting bolts should be tight at all times.
Seats
WARNING
Do not adjust drivers seat while vehicle
is moving. The seat could suddenly or
unexpectedly move causing the driver to lose
control of vehicle, which could result in property
damage, personal injury, or death.
WARNING
Reckless operation of this vehicle over rough
roads or surfaces can cause loss of vehicle
control and result in property damage, personal
injury, or death. Use caution and reduce speed.
Properly adjusted seats and seating systems
may not compensate completely for severe road
conditions. Ensure that head clearance will be
maintained during all road conditions, as the seat
may move up and decrease the available space.
Ensure that head clearance will be maintained
during all road conditions, as the seat may move
up and decrease the available space.
Bench or bucket type seats have fore and aft adjustment only.
Adjust while sitting in seat. Push seat adjustment lever to release
mechanism and move seat to desired position. Be sure seats
are rmly engaged to avoid forward or rearward movement when
vehicle is started or stopped.
Thevehiclemaybeequippedwithasuspensiontypeseat.For
suspension type seat adjustment refer to the booklet or decal
attached to seat frame as supplied by the seat manufacturer.
Extended Cab Bunk (Optional)
International provides an optional bunk for second driver sleep
accommodations. The bunk is a full 72” long and, when raised
up, provides luggage storage under the mattress. Ventilation is
provided by swing out side windows in the bunk area. The Air
Ride suspension cushions the cab for a ride that is comfortable
for both driver, cab passenger as well as bunk passenger.
3879634R1 93

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Navistar WorkStar Series and is the answer not in the manual?

Navistar WorkStar Series Specifications

General IconGeneral
BrandNavistar
ModelWorkStar Series
CategoryTrucks
LanguageEnglish

Related product manuals