Maintenance Intervals And Specifications
Components Requiring Lubrication
1. Steering Gear
2. Steering Intermediate Shaft
3. Front S-Cams and Slack Adjusters
4. King Pin Bushings and Thrust Bearings
5. Tie Rod Ends
6. Steering Drag Link Ends
7. Clutch Cross Shafts and Release Bearing
8. Drive Shaft U-joints and Slip Joint
9. Fifth Wheel Pivot Points and Top Plate (If Equipped)
10. Rear S-Cams and Slack Adjusters
212 3879634R1
To Next Page
Loading...
Need help?
General
