EasyManuals Logo

Navistar WorkStar Series User Manual

Navistar WorkStar Series
258 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #115 background imageLoading...
Page #115 background image
Operation
Operating Instructions
WARNING
All vehicles have blind spots. Make sure your
way is clear in all directions before moving your
vehicle. Failure to follow these procedures could
result in property damage, personal injury, or
death.
WARNING
Operating an engine beyond the maximum
governed speed could result in engine failure
and cause vehicle damage, personal injury, or
death.
Steering
Be alert to any change (feel) in steering when driving. This
change or feel includes increased steering effort, unusual
sounds when turning, excessive wheel play, or pulling to
either side. If any of the above are detected, have the vehicle
inspected and repaired at once by a qualied mechanic.
WARNING
Do not adjust the steering column while
the vehicle is moving. It could suddenly or
unexpectedly move, causing the driver to lose
control of vehicle which could result in property
damage, personal injury, or death.
CAUTION
Do not lubricate the tilt or tilt/telescoping steering
mechanism.
Tilt Steering Column
The optional tilt steering column has innite positions allowing
adjustment toward or away from the driver through a 20 degree
range. The tilt handle is located on the left side of the column.
To tilt the column, pull the lever towards the driver and move the
steering wheel to the desired position. Release the lever to lock
the column in position.
3879634R1 103

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Navistar WorkStar Series and is the answer not in the manual?

Navistar WorkStar Series Specifications

General IconGeneral
BrandNavistar
ModelWorkStar Series
CategoryTrucks
LanguageEnglish

Related product manuals