Operation
# Driver Action System Alerts Engine Operating
Status
6. Correct theft deterrent code is entered after
the warning sequence has begun (within the
programmable delay time)
The continuous alarm beeps and ENGINE STOP indicator
flashes and stops after the alarm sounds once and the
ENGINE STOP indicator flashes once
Engine runs without
interruption
7. Inadvertent incorrect theft deterrent code is
entered
Alarm activated for one long beep and ENGINE STOP indicator
turns on for ~ 1.5 second
Engine runs without
interruption
8. Clear switch is depressed with parking brake
set
No system alerts. Theft deterrent code must be entered before
driving vehicle
Engine runs without
interruption
9. Clear switch is depressed with parking brake
released (assumes correct code previously
entered.)
No action. Previously entered theft deterrent code is not
cleared
Engine runs without
interruption
10. With vehicle stopped while in warning mode,
set parking brake (within the programmable
delay time)
The ENGINE STOP indicator stops flashing and the alarm
stops beeping. The theft deterrent code must be entered
before driving vehicle
Engine runs without
interruption
3879634R1 99
To Next Page
Loading...
Need help?
General
