Operation
Temporary Neutral – 13AAZ. To activate this Auto Neutral
feature, perform the following:
1. To enable Auto Neutral , place the AUTO NEUTL/ON
switch in the ON position (the switch indicator will then
turn On).
2. When the Parking Brake is applied, the transmission
automatically shifts to Neutral, and the AUTO NEUTRAL
indicator in the instrument panel gauge cluster will turn
on.
3. The transmission shifter’s digital display shows a
blinking “N”, indicating the transmission is in Neutral,
and the instrument panel gauge cluster LCD display will
indicate Neutral gear.
When the parking brake is released, the transmission
will go back to the gear originally selected, the shifter’s
digital display will show that gear, the LCD display
will also indicate that gear, and the AUTO NEUTRAL
indicator will go off.
Note: The Auto Neutral switch indicator will still be
On – indicating that the Auto Neutral function is
still enabled – and will remain on until the switch is
placed in the Off position.
4. Repeat these steps as long as the Auto Neutral mode
is desired. To turn off the Auto Neutral mode, place
the AUTO NEUTL/ON switch to the off (AUTO NEUTL)
position. This will turn Off the switch indicator.
Neutral gear Remains (Hard Neutral) – 13WUA. To activate
this Auto Neutral feature, perform the following:
1. To enable Auto Neutral feature , place the AUTO
NEUTL/ON switch in the ON position (the switch
indicator will turn On).
2. When the Parking Brake is applied, the transmission
automatically shifts to Neutral, and the AUTO NEUTRAL
indicator in the instrument panel gauge cluster will turn
on.
130 3879634R1
To Next Page
Loading...
Need help?
General
