NCR 7167 - Print Characteristic Commands

7167 Owner’s Manual Chapter 6: Commands
November 2003
92
Print Characteristic Commands
Hexadecimal Command
Code and Operands
Command Page
12 Select Double-Wide Characters 134
13 Select Single-Wide Characters 134
1B 12 Select 90 Degree Counter-Clockwise Rotated Print 135
1B 16 n Select Pitch (Column Width) 135
1B 20 n Set Character Right-Side Spacing 136
1B 21 n Select Print Modes 138
1B 25 n Select or Cancel User-Defined Character Set 139
1B 26 s c1 c2 d1…dn Define User-Defined Characters 140
1B 2D n Select or Cancel Underline Mode 142
1B 3A 30 30 30 Copy Character Set from ROM to RAM 142
1B 3F n Cancel User-Defined Characters 143
1B 45 n Select or Cancel Emphasized Mode 143
1B 47 Select Double Strike (7156 Emulation Mode) 144
1B 47 n Select Double Strike (7158/7167 Native Modes) 144
1B 48 Cancel Double Strike 145
1B 49 n Select or Cancel Italic Print 145
1B 52 n Select International Character Set 146
1B 55 n Select or Cancel Unidirectional Printing Mode 147
1B 56 n Select or Cancel 90 Degrees Clockwise Rotated
Print
147
1B 72 n Select Print Color
148
1B 74 n Select International Character Set 146
1B 7B n Select or Cancel Upside Down Printing Mode 148
1D 21 n Select Character Size 149
1D 42 n Select or Cancel White/Black Reverse Print
Mode
150
1F 05 n Select Superscript or Subscript Modes 151