7167 Owner’s Manual Appendix A: Specifications
November 2003
254
Thermal Receipt Station Slip Station
Slew Speed
6.7 Inches per Second 4.0 lines per Second
Print Zone
2.83 Inches Maximum 3.23 Inches Maximum
Noise
57 dBA Sound Pressure (ISO 7779) 62 dBA Sound Pressure (ISO 7779)
Graphics (Optional)
User-Defined Graphics, Logo User-Defined Graphics
Other
No Reverse Paper Feed Reverse Paper Feed
Two Form in Sensors
Thermal Receipt Station Impact Slip Station
Paper Diameter
80 mm Max. Not Applicable
Paper Length
83 Meters (273 feet) Side Insertion: 2.0 Inches (Min.)
Front Insertion: 2.75 Inches (Min.)
Paper Width
80 mm ± 1mm
(3.15 Inches ± .02 Inches)
Side Insertion: 8.0 Inches (Min.)
Front Insertion: 2.0 Inches (Min.)
Paper Thickness
Not Applicable .406 mm (.016 Inch)
Printable Area
2.83 Inches (Max.) 3.22 Inches (Max.)
Power Requirements
The 7167 printer receives power from a separate power supply. Here are the voltage
requirements for the power supply.
Maximum Current
Voltage Station Short Term Long Term
24.0 V ± 10% Slip 4.6 Amps 3.15 Amps
Receipt 6.5 Amps 3.15 Amps
Environmental Conditions
Operating Temperature
5°C to 45°C (40°F to 112°F), models with knife
5°C to 50°C (40°F to 120°F), models with no knife
Operating Humidity
5% to 90%
Condensation may occur when equipment is transferred from cold to
warm areas after shipment. The printer's design permits operation after
drying out and stabilizing at room temperature.
To Next Page
Loading...
