NCR 7167 - Reliability; Dimensions and Weight; Density of Receipt Print Lines

7167 Owner’s Manual Appendix A: Specifications
November 2003
255
Reliability
The numbers in the table refer to the Mean Cycle Between Failure (MCBF) for the items
indicated.
Thermal Receipt Printer
52 Million Lines
Impact Slip Printer
30 Million Lines
Impact Print head
200 Million Characters
Electronics
347,000 On time Hours
Communications Card
2,000,000 On Time Hours
Control Panel
2,100,000 On Time Hours
Knife
1 Million Cuts
MICR Check Reader
500,000 Reads
Flip
500,000 Flips
Power Supply
200,000 On-time Hours
Flip Mechanism
200,000 Cycles
Scan I/F Board
1,383,000 MTBF
Scanner Mechanism
500,000 Cycles
Scan Head
1,000,000 Hours MTBF
Reliability staticties based on averages exhibited under lab conditions and do not constitue
a waranty
Dimensions and Weight
Height
174 mm (6.9 Inches)
Height with Cover Open
296 mm (11.7 Inches)
Width
190 mm (7.5 Inches)
Depth
262 mm (10.3 Inches)
Depth with Extended Slip Table
316 mm (12.5 Inches)
Weight
4.50 Kg (10.0 Pounds), Flip Model
4.25 Kg (9.4 Pounds), Non-Flip
Model
Density of Receipt Print Lines
When the receipt station prints high density print lines (graphics), it automatically slows
down to a rate slower than 902 lines per minute. High density print lines are defined as
lines with over 50% of the dots printing on the line (there are 576 total dot columns on the
print station).