NCR 7167 - Uninstalling the Drivers

7167 Owner’s Manual Chapter 3: Solving Problems
November 2003
41
Uninstalling the Drivers
Windows 98:
1. Open the Device Manager and make sure “View Devices By Type” is selected.
2. Scroll down to Universal serial bus controller, and expand the list by pressing the “+” symbol.
You’ll see two entries for your NCR printer.
3. Select the printer name and click Properties.
4. Select the Details tab, then press the Details button to start the Edgeport utility.
5. Click the Advanced tab.
6. Click the Uninstall button and follow the on-screen instructions.
Windows NT:
Windows NT users will need to run the Edgeport Configuration Utility to uninstall the drivers.
1. Press Windows Start Menu button.
2. Choose Programs, then Inside Out Networks Utilities.
3. Choose Edgeport Configuration Utility.
4. Click the Advanced tab.
5. Click the Uninstall button and follow the on-screen instructions.
Windows 2000:
1. Open the Device Manager and make sure “View Devices By Type” is selected.
2. Scroll down to Universal serial bus controller, and expand the list by pressing the “+” symbol.
You’ll see two entries for your NCR printer.