7167 Owner’s Manual Chapter 6: Commands
November 2003
84
By Command Code
All items in BOLD are new or have additional functionality when compared to the 7156.
All items in italic letters are commands for scanner function and are supported only by
model 7167-1035 and 7167-2035. Items in bold italic are Asian mode commands and are
not supported by model 7167-1035 and 7167-2035.
Hexadecimal Command
Code and Operands
Command Name
Page
09 Horizontal Tab 126
0A Print and Feed Paper One Line 117
0C Print and Return to Standard Mode 193
0C Print and Eject Slip 117
0D Print and Carriage Return 118
10 Clear Printer 102
10 04 n Real Time Status Transmission (DLE Sequence) 177
10 05 n Real Time Request to Printer (GS Sequence) 180
11 Close Form 103
12 Select Double-Wide Characters 134
13 Select Single-Wide Characters 134
14 n Feed n Print Lines 118
15 n Feed n Dot Rows 119
16 n Add n Extra Dot Rows 119
17 Print 120
18 Open Form 103
18 Cancel Print Data in Page Mode 194
19 Perform Full Knife Cut 104
1A Perform Partial Knife Cut 104
1B (+ *.bmp) Download BMP Logo 154
1B 07 Generate Tone 105
1B 0C Print Data in Page Mode 194
1B 12 Select 90 Degree Counter-Clockwise Rotated
Print
135
1B 14 n Set Column 126
1B 16 n Select Pitch (Column Width) 135
1B 20 n Set Character Right-Side Spacing 136
To Next Page
Loading...
